FLEXI TRACE 30m
 		€ 485.00

Cable Locators

Code
FT 30		 FLEXI-TRACE 30m - is a device used in conjunction with the Sigen 2 signal generator, The Tomkat 2 Cable Locator and Pipe Locator, Sonde and the Signal Clamp. The Flexi Trace is bright yellow which makes it highly visable on site and the environment in which it's used, it comes ready to use on a handy reel carrier. Users find the Flexi Trace invaluable in the detection and avoidance of cables and pipes. DESCRIPTION FLEXI-TRACE used in conjunction with the TOMKAT 2 Cable Locator & SIGEN 2 Technical Specification Technical & all other specification subject to change without notice Location Depth 3 Meters 3 Lengths 30 Meters, 50 Meters or 80 Meters Construction Copper conductor encased in fibre glass mounted on a steel frame Waterproof IP 57  

 Quantity:


FLEXI TRACE 50m
 		€ 515.00

Cable Locators

Code
FT 50		 FLEXI-TRACE 50m - is a device used in conjunction with the Sigen 2 signal generator, The Tomkat 2 Cable Locator and Pipe Locator, Sonde and the Signal Clamp. The Flexi Trace is bright yellow which makes it highly visable on site and the environment in which it's used, it comes ready to use on a handy reel carrier. Users find the Flexi Trace invaluable in the detection and avoidance of cables and pipes. DESCRIPTION FLEXI-TRACE used in conjunction with the TOMKAT 2 Cable Locator & SIGEN 2 Technical Specification Technical & all other specification subject to change without notice Location Depth 3 Meters 3 Lengths 30 Meters, 50 Meters or 80 Meters Construction Copper conductor encased in fibre glass mounted on a steel frame Waterproof IP 57  

 Quantity:


SIGNAL CLAMP
 		€ 175.00

Cable Locators

Code
SIGNAL CLAMP		 SIGNAL CLAMP - The Signal Clamp is a device which is very much part of the Pact Services cable and pipe locator range.Using a Signal Clamp aids the operator in the detection and thus avoidance of hidden service cables by applying a distinct signal to the designated service, which could be a street light or any other object used to carry an insulated cable, this device lets the operator single out the service cable which needs to be traced. To operate the Signal Clamp simply plug the black plug end in to the socket on the Sigen 2 signal generator, the operator then places the jaws of the Clamp around the service to be traced ensuring the clamp is fully closed. Features Include • 100mm internal diameter • Used to trace street light and other insulated cables. • Can be adapted to use with other makes of Signal Generator.  

 Quantity:


SONDE
 		€ 235.00

Cable Locators

Code
SONDE		 SONDE - Used in conjunction with the TOMKAT 2 Cable Locator to trace non-metallic pipes and ducts.The 33kHz Sonde is a self-contained waterproof transmitter, which is attached to drain rods or any movable device that can be propelled inside non-metallic pipes. Used correctly you can pinpoint the exact route of the pipe and were a blockage is.DESCRIPTION 33kHz SONDE used in conjunction with the TOMKAT 2 Cable locator Location Depth 5 Meters Frequency 33kHz (exact 32.768kHz) Waterproof IP 57 Battery 1 x Alkaline AA Battery Life 30 Hours continuous use Operating Temperature -20C to + 50C Dimensions 150mm long by 40mm diameter Fitting M10 Male thread Weight 250g  

 Quantity:


€ 375.00

Cable Locators

Code
SIGEN 2		 The SIGEN 2 is a full function industry signal transmitter operating at 33kHz, applying a signal either by induction or connection. The SIGEN 2 works in conjunction with the TOMKA   More...

 Quantity:


€ 475.00

Cable Locators

Code
TOMKAT 2		 TOMKAT 2 is a full function Industry standard locator. Better by design the TOMKAT 2 is rugged, lightweight & packed full of features including detachable speaker for use in noisey conditions.   More...

 Quantity: